Cardo Q3 MultiSet User's Guide download pdf (Page 11)

6.3 LISTENING TO MUSIC VIA A2DP

NOTE: The scala rider can also receive audio via the

enclosed cable from non-Bluetooth MP3 Players or

audio sources as described in section 6.4

Available only on AVRCP compatible Bluetooth audio sources

Play In Standby, tap “MM”

Pause/Stop Press “MM” for 2 seconds

Next Track With music ON, tap “MM”

Previous Track* With music ON, double tap “MM”

*With some phones you may need to repeat this action

SWITCHING BETWEEN A2DP AUDIO SOURCES

1. Stop the music playback from the current device.

2. Start music playback from the other device.

6.4 CABLECONNECTED MP3 PLAYERS

The USB Port can be used to connect a non-Bluetooth audio source

using the enclosed cable.

Micro USB / AUX •

1. Verify that the scala rider is in Standby (single BLUE ash every

3 seconds).

2. Connect the MP3 cable to the Music Player’s jack and insert the

other end into the USB Port.

To listen to music from a cable-connected device, operate the

Music Player using its buttons as usual (FF/REW/PLAY/PAUSE).

6.5 MUSIC SHARING

Music-sharing allows rider and passenger to listen to the

same music within a range of 33 ft / 10m.

Music sharing works only with A2DP (Bluetooth stereo)

enabled audio sources. In order to share your music with your

riding partner, your scala rider unit [SENDER] needs to be paired

to the other unit [RECEIVER] on CHANNEL A and the RECEIVER

must be in Standby mode.

[SENDER] Start/Stop

sharing your music:

During A2DP music playback, press “V+”

or “V-” for 2 seconds

[RECEIVER] Stop music

sharing:

Press “V+” or “V-” for 2 seconds

Phone/Intercom calls and GPS audio navigation will override music

playback.

NOTE: Music sharing does not transmit voice audio and cannot be

used as an Intercom call.

scala rider

Q3 / Q3 MultiSet™ |

scala rider

Q3 / Q3 MultiSet™ |

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Cardo Q3 MultiSet User's Guide Page 11

Comments to this Manuals